# How to Connect MetaMask to Hyperliquid (2026 Guide)

> Connect MetaMask to Hyperliquid in under 2 minutes. Step-by-step: install MetaMask, add Arbitrum, connect wallet, and get a 4% fee discount. No KYC required.

*Source: https://hyperliquidguide.com/guides/getting-started/connect-metamask-to-hyperliquid*

To connect MetaMask to Hyperliquid, install the MetaMask browser extension, navigate to **[app.hyperliquid.xyz](https://app.hyperliquid.xyz/join/Concept211)**, click **Connect**, select MetaMask, and approve the connection. The entire process takes under two minutes — no custom RPC, no network configuration, and no KYC required. Hyperliquid uses a bridge-based system where MetaMask signs transactions, and your funds are secured on Hyperliquid's custom L1 chain.

## Why MetaMask Is the Most Popular Wallet for Hyperliquid

MetaMask is the most widely used Ethereum wallet, with over 30 million monthly active users. It works seamlessly with Hyperliquid because both are built on EVM (Ethereum Virtual Machine) compatible infrastructure. Connecting MetaMask to Hyperliquid takes less than two minutes and requires no identity verification.

Hyperliquid is a **non-custodial** exchange, which means your funds remain under your control through your MetaMask wallet. There is no account creation process with emails or passwords - your wallet **is** your account.

> **Key takeaway:** Your MetaMask wallet is your Hyperliquid account. No emails, no passwords, no KYC. Connect, deposit, and trade in under 5 minutes.

## Prerequisites

Before connecting MetaMask to Hyperliquid, make sure you have:

- **MetaMask browser extension** installed and updated (version 11.0+ recommended)
- **A funded wallet** with USDC on the Arbitrum network (for depositing into Hyperliquid)
- **A small amount of ETH on Arbitrum** (less than $1 worth, to cover the one-time bridge gas fee)
- **A modern browser** - Chrome, Firefox, Brave, or Edge all work

If you do not have MetaMask yet, the next section walks you through installing it.

## Step-by-Step: Connect MetaMask to Hyperliquid

### Step 1: Install MetaMask

If you already have MetaMask installed, skip to Step 2.

1. Go to [metamask.io/download](https://metamask.io/download)
2. Click **"Install MetaMask"** for your browser (Chrome, Firefox, Brave, or Edge)
3. Click **"Add to Browser"** and confirm the extension installation
4. Follow the setup wizard to create a new wallet
5. **Write your 12-word seed phrase on paper** - store it somewhere safe and offline. Anyone with your seed phrase controls your wallet.
6. Confirm your seed phrase and set a strong password

![MetaMask setup wizard showing seed phrase backup step](/images/getting-started/shared/metamask-extension-page.webp)

> **Note:** Never share your seed phrase. Never store it in a text file, screenshot, or cloud service. Hyperliquid support will never ask for it. No legitimate service will ever ask for it.

### Step 2: Add the Arbitrum Network to MetaMask

Hyperliquid deposits come from the Arbitrum network. MetaMask may already have Arbitrum configured, but if it does not:

1. Open MetaMask and click the **network dropdown** at the top (it usually says "Ethereum Mainnet")
2. Click **"Add Network"** or **"Show/hide test networks"** and select **"Add a network manually"**
3. Enter the Arbitrum One network details:
 - **Network Name**: Arbitrum One
 - **RPC URL**: `https://arb1.arbitrum.io/rpc`
 - **Chain ID**: 42161
 - **Currency Symbol**: ETH
 - **Block Explorer URL**: `https://arbiscan.io`
4. Click **Save**

Alternatively, visit [chainlist.org](https://chainlist.org), search for "Arbitrum One," and click "Add to MetaMask" for automatic configuration.

> **Tip:** Using Chainlist is the easiest method - it auto-fills all the network details for you in one click. No manual entry needed.

### Step 3: Connect to Hyperliquid

1. Open your browser and navigate to **app.hyperliquid.xyz**
2. Click the **"Connect"** button in the top-right corner of the page
3. Select **"MetaMask"** from the wallet options
4. MetaMask will pop up asking you to confirm the connection - review the permissions and click **"Connect"**
5. You may be asked to sign a message to verify your wallet ownership - click **"Sign"**

![Hyperliquid wallet connection modal showing MetaMask option](/images/getting-started/how-to-trade-on-hyperliquid/connect-wallet-popup.webp)

That's it. Your wallet is now connected to Hyperliquid. You will see your wallet address displayed in the top-right corner of the Hyperliquid interface.

**First Time Connecting? Get 4% Off Fees** — If this is your first time connecting to Hyperliquid, use our referral code for a 4% lifetime fee discount. The discount cannot be applied after your first connection. [Connect with Fee Discount](https://app.hyperliquid.xyz/join/Concept211)

### Step 4: Apply a Referral Code (Critical - First Connection Only)

When you connect a new wallet to Hyperliquid for the first time, this is your **only chance** to apply a referral code. Our referral code (Concept211) gives you a **4% discount on all trading fees** for the lifetime of your account, up to your first $25 million in volume.

If you connected through our [referral link](https://app.hyperliquid.xyz/join/Concept211), the code is applied automatically. If you navigated directly to app.hyperliquid.xyz, check the referral section in your account settings to see if a code is active.

> **Warning:** You cannot add a referral code after your account is already created. If you have already connected without one, the only option is to create a new account with a different wallet address.

### Step 5: Deposit USDC

With your wallet connected, you need to deposit funds before you can trade:

1. Click the **"Deposit"** button in the navigation area
2. Enter the amount of USDC you want to deposit
3. Confirm the transaction in MetaMask
4. Wait approximately 1-2 minutes for the deposit to confirm

For a detailed walkthrough of the deposit process, see our [complete USDC deposit guide](/guides/getting-started/deposit-usdc-to-hyperliquid), or learn how to [bridge funds to Hyperliquid](/guides/getting-started/bridge-to-hyperliquid) from any chain.

---

## Troubleshooting Common Connection Issues

### MetaMask Popup Does Not Appear

- **Check if MetaMask is unlocked** - Open the MetaMask extension and enter your password
- **Disable other wallet extensions** - If you have [Rabby](/guides/getting-started/connect-rabby-to-hyperliquid), [Phantom](/guides/getting-started/connect-phantom-to-hyperliquid), or other wallet extensions installed, they can intercept the connection. Temporarily disable them and try again
- **Clear browser cache** - Sometimes stale data prevents the popup. Clear your cache for app.hyperliquid.xyz and refresh
- **Try a different browser** - If Chrome is not working, try Brave or Firefox

### "Connection Rejected" Error

This happens when you click "Reject" in the MetaMask popup, or the popup times out. Simply click "Connect" on Hyperliquid again and approve the connection in MetaMask this time.

### MetaMask Shows Wrong Network

If MetaMask displays a network mismatch warning:

1. Open MetaMask
2. Click the network selector at the top
3. Switch to **Arbitrum One**
4. Return to Hyperliquid and reconnect

Hyperliquid usually auto-prompts for a network switch, but manual switching resolves most issues. For persistent connection problems, see our [complete wallet troubleshooting guide](/troubleshooting/wallet-connection-issues).

### Connected But Wallet Shows 0 Balance

Connecting your wallet does not automatically transfer funds. You need to **[deposit USDC](/guides/getting-started/deposit-usdc-to-hyperliquid)** from Arbitrum into Hyperliquid using the Deposit button. Your MetaMask balance and Hyperliquid trading balance are separate.

**Wallet Connected? Start Trading with a Discount** — Use our referral code for a 4% lifetime reduction on trading fees. Zero gas fees, sub-second execution, no KYC required. [Start Trading - Save 4%](https://app.hyperliquid.xyz/join/Concept211)

## Next Steps

Once your MetaMask is connected to Hyperliquid:

1. **[Follow the beginner checklist](/guides/getting-started/hyperliquid-beginner-checklist)** - Complete start-to-trade checklist covering every step from here to first trade
2. **[Deposit USDC](/guides/getting-started/deposit-usdc-to-hyperliquid)** - Bridge funds from Arbitrum into your Hyperliquid trading account
3. **[Place your first trade](/guides/getting-started/how-to-trade-on-hyperliquid)** - Follow our complete trading guide to go from deposit to first position
3. **[Trade on your phone](/guides/getting-started/hyperliquid-mobile-trading)** - Set up Hyperliquid as a PWA on your mobile device for trading on the go
4. **[Learn order types](/guides/trading/order-types-guide)** - Explore limit orders, stop-losses, and advanced features to trade more effectively
5. **[Understand trading fees](/guides/fees/fees-explained)** - Learn about maker/taker fees and how to minimize costs
6. **[Secure your wallet](/guides/getting-started/crypto-trading-security-guide)** - Protect your MetaMask with best practices for seed phrase storage, phishing prevention, and VPN usage